This metallic epoxy flooring kit will cover an area of up to 1500 sq. ft and contains the following items:
Primer Coat:
4 – 3 gallon kits (Parts A & B) NEXTECH PRO™ APC 818 LVP is a Pre-Tinted, High Solids, High Build Epoxy Concrete Primer.
Standard Colors: Beige, Charcoal, Dark Gray, Fazor Tan, Light Gray, Medium Gray, Off White, Camel, Tan, Tile Red, White, Black
Decorative Coat:
1 – 14.75 gallon kit (Parts A & B) & 2 - 2.95 gallon kits (Parts A & B) NEXTECH PRO™ APC 782 is a 100% solids, Clear epoxy. Suitable for use as a either a binder and/or broadcast coating.
Standard Topcoat:
Clear, Gloss: 1 – 3 gallon kit (Parts A & B) & 1 - 1.5 gallon kit (Parts A & B) NEXTECH PRO™ APC 433VOC Clear Gloss, High-Performance Polyester Aliphatic Polyurethane Sealer Topcoat.
Optional Satin Topcoat:
Clear, Satin: 1 – 3 gallon kit (Parts A & B) & 1 - 1.5 gallon kit (Parts A & B) NEXTECH PRO™ APC 431 Semi-Gloss/Satin, High-Performance Aliphatic Polyurethane Sealer Topcoat
APC 431 is a two component, aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability.
RECOMMENDED FOR: Areas where a durable semi-gloss/satin appearance is desired.
Metallic Pigments Included in Kit
10-12 oz. Jar of Primary Color Metallic Pigment
2 - 4 oz. Jar of Accent Color Metallic Pigment
(Your choice of any of our Standard Color Group Metallic Colors)
The metallic pigments in our kits have been calculated to be used at a ratio of (6) six ounces per gallon of mixed epoxy. This ratio will achieve the most desired, semi-transparent look, most requested, in metallic flooring installations. Please note: Depending on the opacity desired of your final look, metallic pigments can be added at a ratio of up to 12 ounces per gallon.
Read more about each product included in this kit below. For more information please review the products (TDS) Technical Data Sheets and (SDS) Safety Data Sheets.
Expanded information on the coating products included in this kit:
Primer Coat:
NEXTECH PRO™ APC 818LVP Pre-Tinted, High Solids, High Build Epoxy Primer
APC 818 LVP is a two component 93% (+/- 1%) solids epoxy colored coating designed for applications where a high solids primer is needed before applying high solids or 100% solids topcoats for build coats over concrete.
RECOMMENDED FOR: Recommended for a high build basecoat on concrete or masonry. Product is suitable in many chemical exposure environments.
CURE SCHEDULE (70 Degrees F)
Pot Life (1.5 Gallon) 35-55 Minutes
Tack Free (Dry to Touch) 6-9 hours
Recoat or Topcoat 10-14 hours
Light Foot Traffic 12-16 hours
Full Cure (Heavy Traffic) 2-7 days
Application Temperature: 60-90 degrees F with
relative humidity below 85% for best results
Coverage Rate: 133-267 sq. ft. per gallon @ 6-12 Mil
Packaging: 1.5 gallon kit (Parts A & B), Available in Standard Colors.
Standard Colors: Beige, Charcoal, Dark Gray, Fazor Tan, Light Gray, Medium Gray, Off White, Camel, Tan, Tile Red, White, Black
Decorative Coat:
NEXTECH PRO™ APC 782 Clear, 100% solids epoxy binder and broadcast coat.
APC 782 is a two-component, 100% solids epoxy broadcast coat that can be filled with metallic pigments, glitter, paint flakes, marble chips and colored sand mixtures to provide an infinite array of color schemes or patterns.
RECOMMENDED FOR: Garage floors, warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative filled floor is desired.
CURE SCHEDULE (70 Degrees F)
Pot Life (1.5 Gal. Vol.) 20-30 minutes
Tack Free (Dry to touch) 7-10 hours
Recoat or Topcoat 12-18 hours
Light Foot Traffic 16-24 hours
Full Cure (Heavy Traffic) 2-7 days
Application Temperature: 55-90°F
Coverage rate: 90-100 sq. ft. per gallon @ 16-18 Mil
Packaging: 2.95 gallon kit (Parts A & B)
Standard Colors: Clear
Standard Topcoat:
NEXTECH PRO™ APC 433VOC Clear Gloss, High-Performance Polyester Aliphatic Polyurethane Sealer Topcoat
APC 433VOC is a two component, polyester/aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability. This product meets VOC requirements for newly enacted VOC laws in NY, PA, NJ, and other states as an industrial maintenance coating.
RECOMMENDED FOR: Areas where a durable high-gloss appearance is disired, Residential, Commercial, Auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposure areas.
CURE SCHEDULE (70 Degrees F)
Pot Life (1 ½ gallon vol.) 2-4 hours
Tack Free (Dry to Touch) 3-5 hours
Recoat or Topcoat 5-9 hours
Light Foot Traffic 14-24 hours
Full Cure (Heavy Traffic) 3-5 days
Application Temperature: 45-90 degrees F with
relative humidity below 90%
Coverage: 320-500 sq. ft. per gallon @ 3-5 Mil
Packaging: 1.5 gallon kit (Parts A & B)
Standard: Clear Gloss
Please note: A satin appearance may be achieved by either adding an aluminum oxide additive or other powdered aggregates to APC 433VOC Clear, Aliphatic Urethane. The addition of aggregates will not only result in a satin finish, it will also add a textured surface much akin to the texture of 220-240 grit sandpaper. The resulting slip-resistant topcoat adds both safety and added durability to what would other wish be an eggshell/orange peel, semi-smooth, texture to the untreated urethane topcoat.
If a satin finish is desired, but you prefer the semi-smooth appearance without an aggregate additive, we offer NEXTECH PRO™ APC 431 Semi-Gloss/Satin, High-Performance Aliphatic Polyurethane Sealer Topcoat as an alternative.
Optional Satin Topcoat:
NEXTECH PRO™ APC 431 Semi-Gloss/Satin, High-Performance Aliphatic Polyurethane Sealer Topcoat
APC 431 is a two component, aliphatic polyurethane floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability.
RECOMMENDED FOR: Areas where a durable semi-gloss satin appearance is desired. Residential, Commercial, Auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposure areas.
CURE SCHEDULE (70 Degrees F)
Pot Life (1 ½ gallon vol.) 3-5 hours
Tack Free (Dry to Touch) 2-4 hours
Recoat or Topcoat 4-8 hours
Light Foot Traffic 14-24 hours
Full Cure (Heavy Traffic) 3-5 days
Application Temperature: 45-90 degrees F with
relative humidity below 90%
Coverage: 320-500 sq. ft. per gallon @ 3-5 Mil
RECOMMENDED FILM THICKNESS: 3-5 mils per coat wet thickness (Do not apply thicker)
Packaging: 1.5 gallon kit (Parts A & B)
Standard: Semi-Gloss/Satin
