NEXTECH PRO™ APC 294 97% SOLIDS FAST SET EPOXY HIGH BUILD BODY COAT LO TEMP (Kit: Parts A & B) Pre-Tinted
NEXTECH PRO™ 97% SOLIDS FAST SET EPOXY HIGH BUILD BODY COAT LO TEMP (Kit: Parts A & B) Pre-Tinted
APC 294 is a two component 97% (+/- 1%) solids colored coating designed for applications where a high build quick setting impact resistant floor is needed. This product has a fast rate of property development and will achieve full chemical resistance in as little as 3 days at normal room temperatures. In addition, APC 294 has good low temperature cure capabilities to as low as 50°F. APC 294 has good color stability and topcoating with an aliphatic urethane is optional dependent on color stability requirements.
RECOMMENDED FOR: Medium to high build topcoats on concrete or masonry. APC 294 is suitable for a medium build broadcast binder because of its low viscosity.
CURE SCHEDULE (70 Degrees F)
Pot Life (1 Gallon) 22-32 minutes, (150g mass) 25-35 minutes
Tack Free (Dry to Touch @ 70°) 4-6 hours, (Dry to Touch @ 50°) 12-16 hours
Recoat or Topcoat 6-9 hours
Light Foot Traffic 8-14 hours
Full Cure (Heavy Traffic) 2-5 days
Application Temperature: 50-90°F with relative humidity below 85%
Coverage rate: 80-160 sq.ft. per gallon @ 10-20 Mil
Packaging: Available in 2.95 Gallon, and 14.75 Gallon Kits.
Standard Colors: Beige, Black, Charcoal, Dark Gray, Light Gray, Medium Gray, Off White, SE Camel, Tan, Tile Red, White
Non-Standard Colors: Brown, Green, Light Blue, Blue, Safety Yellow, Traffic Yellow, Extra Hide White
(Please note: non-standard colors may require additional lead times and or may have minimum order requirements.)