NEXTECH PRO™ APC 292LVP FAST SET HIGH BUILD EPOXY PRIMER (Kit: Parts A & B) PRE-TINTED
NEXTECH PRO™ APC 292LVP is a 93% solids, pre-tinted epoxy primer coating over concrete.
APC 292LVP is a Fast Set, two component 93% solids colored epoxy coating designed for applications where a high solids primer is needed before applying high solids or 100% solids topcoats for build coats over concrete. APC 292LVP has good low temperature cure capabilities down to as low as 45°F. However, APC 292LVP only has fair color stability and must be top coated with an aliphatic urethane when long term color stability is a requirement.
RECOMMENDED FOR: Recommended for a high build basecoat on concrete or masonry. Product is suitable in many chemical exposure environments.
CURE SCHEDULE (70 Degrees F)
Pot Life (150 Gram Mass) 26 -38 Minutes
Tack Free (Dry to Touch) 4.5 - 6 hours
Recoat or Topcoat 7- 9 hours
Light Foot Traffic 8- 12 hours
Full Cure (Heavy Traffic) 2- 5 days
Application Temperature: 45-90 degrees F with
relative humidity below 85%
Coverage rate:133-267 sq.ft. per gallon @ 6-12 Mil
Packaging: Available in 2.95 Gallon, 14.75 Gallon Kits
Standard Colors: Beige, Charcoal, Dark Gray, Fazor Tan, Light Gray, Medium Gray, Off White, SE Camel, Tan, Tile Red, White
Non-Standard Colors: Brown, Green, Light Blue, Blue, Safety Yellow, Traffic Yellow, Safety Red, Extra Hide White
(Please note: non-standard colors may require additional lead times.)