NEXTECH PRO™ APC 292 FAST SET 100% SOLIDS EPOXY BODY COAT (Kit: Parts A & B) Pre-Tinted
NEXTECH PRO™ APC 292 Pre-tinted, solid color, 100% solids, fast set epoxy.
APC 292 is a two component 100% (+/- 1%) solids colored epoxy coating designed for applications where a high build impact and chemical resistant floor is needed. APC 292 has good low temperature cure capabilities down to as low as 45°F. However, APC 292 only has fair UV color stability and should be topcoated with an aliphatic urethane when long term color stability is a requirement.
RECOMMENDED FOR: Recommended for a high build topcoat for traffic areas, chemical troughs and curbs as well as tanks and chemical spill areas for cement masonry or brick.
CURE SCHEDULE (70 Degrees F)
Pot Life (1 1/2 Gallon) 16-26 Minutes
Tack Free (Dry to Touch) 3.5 - 5.5 hours
Recoat or Topcoat 6-8 hours
Light Foot Traffic 6-12 hours
Full Cure (Heavy Traffic) 2-5 days
Application Temperature: 45-90 degrees F with relative humidity below 85%
Coverage: 53-130 sq. ft. per gallon @ 12-30 Mil
Packaging: Available in 2.95 gallon, and 14.75 gallon kits.
Standard Colors: Beige, Charcoal, Dark Gray, Fazor Tan, Light Gray, Medium Gray, Off White, SE Camel, Tan, Tile Red, White
Non-Standard Colors: Brown, Green, Light Blue, Blue, Safety Yellow, Traffic Yellow, Safety Red, Extra Hide White
(Please note: non-standard colors may require additional lead times.)