NEXTECH PRO™ APC-ULV1000, ULTRA LOW VISCOSITY EPOXY 100% SOLIDS, BUILD, BINDER, BROADCAST COAT (Kit: Parts A & B) Clear

NEXTECH PRO™APC-ULV1000 is a solvent-less, two component ultra-low viscosity epoxy coating system, its ultra-low viscosity and excellent self-leveling characteristics creates exceptional “flow and suspension”, allowing for the creation of strikingly beautiful metallic epoxy flooring with unique veining and layering possibilities not readily achieved with lower viscosity blends.

ADVANTAGES Dense surface resistant to bacteria and moisture and easy to clean. May apply several layers on itself with excellent adhesion. Contains no solvent with a very low VOC content (VOC = 75.4 g/L), allowing for interior application without harmful odors. Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate.

The high-gloss and clarity of APC-ULV1000 make it ideal for all build, binder and broadcast coats. 100% solids epoxy broadcast coat that can be filled with paint flakes, marble chips, metallic pigments, quartz, colored sand mixtures to provide an infinite array of color schemes or patterns. May be tinted with our universal solid color pigments.

RECOMMENDED FOR: metallic epoxy floors, garage floors, warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative or broadcast floor is desired.

MIX RATIO, BY VOLUME A:B = 2:1
MIX RATIO, BY WEIGHT
Clear: A:B = 100:41-48
POT LIFE 16 OZ (454 G) 40-50 minutes @ 77°F (25°C)
OPEN TIME ON SUBSTRATE 45-60 minutes
VOC 75.4 g/L

RECOMMENDED THICKNESS:
AS PRIMER:                                             FINISH COAT:
SOLID COLOR 10 mils (150 ft²/gal)          16 mils (100 ft²/gal)

FLAKES SYSTEM 10 mils (150 ft²/gal)       13 mils (120 ft²/gal)

METALLIC SYSTEM 10 mils (150 ft²/gal)   40 mils (40 ft²/gal)

Packaging: 3 US Gallons (11.35 L)