NEXTECH PRO™ APC-100 STANDARD TRANSPARENT EPOXY 100% SOLIDS, BUILD, BINDER, BROADCAST COAT (Kit: Parts A & B) Clear

NEXTECH PRO™ APC-100 PE-100 is a solvent-less, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties. Clear, 100% solids epoxy for build, binder and broadcast coats. 100% solids epoxy broadcast coat that can be filled with paint flakes, marble chips, metallic pigments, quartz, colored sand mixtures to provide an infinite array of color schemes or patterns.

ADVANTAGES: Dense surface resistant to bacteria and moisture and easy to clean. May apply several layers on itself with excellent adhesion. Contains no solvent with a very low VOC content (VOC = 75.4 g/L), allowing for interior application without harmful odors. Excellent adhesive properties, allowing application on other firm and hard coatings, as well as a good bonding to the substrate.

RECOMMENDED FOR: Garage floors, warehouses, kitchens, restrooms, and other areas where either a high build clear product is needed or where a decorative or broadcast floor is desired.

POT LIFE 16 OZ (454 G) 10-15 minutes @ 77°F (25°C)
WORKING TIME 40 minutes
RECOMMENDED THICKNESS AS PRIMER: 10 mil (150 ft²/gal) for solid color, flake, and metallic systems.
RECOMMENDED THICKNESS FINISH COAT: 16 mil (100 ft²/gal) for solid color, 13 mils (120 ft²/gal) for flake, 40 mils (40 ft²/gal) for metallic systems.
MIX RATIO, BY VOLUME A:B = 2:1

COLOR: Clear

PACKAGING 3 US gal (11.35 L) or 15 US gal (56.7 L)